Briefly, this error occurs when an Elasticsearch upgrade task is reassigned to another node due to a failure in the current node. This could be due to network issues, node failure, or resource constraints. To resolve this issue, you can try the following: 1) Check the health of your nodes and ensure they are functioning properly. 2) Verify your network connectivity. 3) Ensure your nodes have sufficient resources to handle the upgrade task. 4) If the problem persists, consider manually assigning the task to a specific node.
This guide will help you check for common problems that cause the log ” [{}] [{}] upgrade task reassigned to another node while failed ” to appear. To understand the issues related to this log, read the explanation below about the following Elasticsearch concepts: plugin, task, upgrade, snapshot, node.
Overview
A task is an Elasticsearch operation, which can be any request performed on an Elasticsearch cluster, such as a delete by query request, a search request and so on. Elasticsearch provides a dedicated Task API for the task management which includes various actions, from retrieving the status of current running tasks to canceling any long running task.
Examples
Get all currently running tasks on all nodes of the cluster
Apart from other information, the response of the below request contains task IDs of all the tasks which can be used to get detailed information about the particular task in question.
GET _tasks
Get detailed information of a particular task
Where clQFAL_VRrmnlRyPsu_p8A:1132678759 is the ID of the task in below request
GET _tasks/clQFAL_VRrmnlRyPsu_p8A:1132678759
Get all the current tasks running on particular nodes
GET _tasks?nodes=nodeId1,nodeId2
Cancel a task
Where clQFAL_VRrmnlRyPsu_p8A:1132678759 is the ID of the task in the below request
POST /_tasks/clQFAL_VRrmnlRyPsu_p8A:1132678759/_cancel?pretty
Notes
- The Task API will be most useful when you want to investigate the spike of resource utilization in the cluster or want to cancel an operation.
Overview
Upgrade refers to migrating your Elasticsearch version to a newer version. The process of updating distributed systems like Elasticsearch can be intricate, given the extensive data quantities, the involvement of numerous nodes, and the diverse configurations that may exist within your cluster.
An upgrade of an existing cluster can be done in two ways: through a rolling upgrade and through a full cluster restart. The benefit of a rolling upgrade is having zero downtime.
Bear in mind that any changes to your system could lead to data loss if the instructions are not adhered to accurately. Thoroughly test and strategize your upgrade, and ensure you create a backup of your data prior to executing any updates.
For guides on how to upgrade specific versions, see:
- How to Upgrade Elasticsearch from Version 5 to Version 6
- How to Upgrade Elasticsearch from Version 6 to Version 7
- How to Upgrade Elasticsearch from Version 7 to Version 8
What should I check before upgrading versions?
Elasticsearch nodes cannot be downgraded after upgrading. Before starting the upgrade process you should:
- Check the deprecation log and resolve any issues.
- Review the breaking changes to make sure you know of any functionalities which may changes or disappear. This would mainly affect node configuration, index mappings and templates, and cluster settings.
- Check the ES plugin compatibility to ensure they are compatible with the new version.
- Set up a test environment to test the upgrade process in a testing or staging environment first before upgrading your production cluster to avoid any issues.
- Take a backup and snapshots from your data, as the only way to “reverse” a failed upgrade is to create a new cluster with the old version and restore the data from snapshots.
How to perform offline upgrades – full cluster restart upgrades
A complete cluster restart upgrade involves simultaneously stopping all Elasticsearch nodes, updating them, and subsequently restarting each one. Inevitably, this upgrade approach will necessitate the downtime of your Elasticsearch cluster throughout the entire process.
Generally, offline upgrades are simpler than online ones because there’s no need to handle a cluster with varying node versions concurrently.
The steps are:
- Disable shard allocation
- Stop all Elasticsearch nodes and upgrade them
- Upgrade any plugins
- Start the Elasticsearch cluster
- Re-enable shard allocation
- Upgrade client libraries to new version
- Restart master eligible nodes
- Restart non-master eligible nodes
Keep in mind that during a full cluster restart, the master nodes need to be initiated prior to the non-master nodes. This is essential for allowing the master nodes to establish the cluster so that other nodes can join, which is in contrast to a rolling upstart where non-master nodes should be upgraded before the master nodes.
How to perform online upgrades – rolling restart upgrades
A rolling restart upgrade allows for updating a cluster without incurring any downtime. In this scenario, every node is sequentially upgraded and rebooted, without ever halting the entire Elasticsearch cluster.
Rolling restart upgrades cannot be performed when there is a change in MAJOR versions, except for specific exceptions:
- Upgrading Elasticsearch version 5.6.16 to version 6.x.x
- Upgrading Elasticsearch version 6.8.23 to version 7.x.x
- Upgrading Elasticsearch version 7.17.5 to version 8.x.x
For this reason, when performing a rolling restart upgrade between major versions, it is imperative to ALWAYS utilize the most recent minor version as an intermediary step for upgrading to the subsequent major version. For instance, if you are operating Elasticsearch 5.x.x, you can first update to 5.6.16 and then proceed to 6.8.23.
How to upgrade nodes in a rolling upgrade
The process for upgrading your nodes is as follows, upgrading all NON master-eligible nodes first.
- Make sure your cluster status is green and stable
Ensure that all replicas are available so that shutting down the node will not cause data loss.
- Disable unnecessary indexing
Wherever possible, you should stop all indexing processes to increase the cluster’s stability.
- Disable shard allocation
It is important to disable shard allocation so that when you stop a node for upgrade the cluster does not reallocate shards to another node. (See command below).
- Stop Elasticsearch
Stop Elasticsearch before moving on to the next step.
- Upgrade Elasticsearch
The method used to upgrade will depend upon your installation method.
- Upgrade plugins
Elasticsearch will not start if the plugin is not the same version as Elasticsearch.
- Start Elasticsearch
Start Elasticsearch before moving on to the next step.
- Re-enable shard allocation
Using the command given below.
- Check that the upgraded node has rejoined the cluster
Using the command below, you can check how many nodes are in the cluster.
- Wait for cluster status to turn green
The command provided below will also show you the progress of the shard recovery process on the upgraded node, until the cluster reaches a green state.
- Repeat
Repeat the full process above for each node.
To disable shard allocation, run:
PUT _cluster/settings
{
"persistent": {
"cluster.routing.allocation.enable": "primaries"
}
}To re-enable shard allocation, run:
PUT _cluster/settings
{
"persistent": {
"cluster.routing.allocation.enable": null
}
}Get cluster status and see how many nodes are in the cluster using:
GET _cluster/health
Common problems and important points
- The major problem with upgrades is version incompatibility. Elasticsearch supports rolling upgrades only between minor versions. You need to make sure to go through the official documentation to see if your cluster can support a rolling upgrade, otherwise a complete reindexing is required.
- Once you upgrade an Elasticsearch node, a rollback cannot be done. You need to make sure to backup your data before an upgrade.
- Elasticsearch continuously removes or deprecates some of its features with every release, so keep an eye on the change logs of each version before planning an upgrade.
- While doing a rolling upgrade, it is important to disable shard allocation before stopping a node and enable the shard allocation when node is upgraded and restarted. This process helps in avoiding unnecessary IO load in the cluster.
Log Context
Log “[{}] [{}] upgrade task reassigned to another node while failed” classname is SnapshotUpgradeTaskExecutor.java.
We extracted the following from Elasticsearch source code for those seeking an in-depth context :
deleteSnapshotAndFailTask(task; params.getJobId(); params.getSnapshotId());
return;
}
// if the task is failed; that means it was set that way purposefully. So; assuming there is no bad snapshot state
if (SnapshotUpgradeState.FAILED.equals(jobState)) {
logger.warn("[{}] [{}] upgrade task reassigned to another node while failed"; params.getJobId(); params.getSnapshotId());
task.markAsFailed(
new ElasticsearchStatusException(
"Task to upgrade job [{}] snapshot [{}] got reassigned while failed. Reason [{}]";
RestStatus.INTERNAL_SERVER_ERROR;
params.getJobId();
